Home → Volocity → General → Locate Volocity dongle serial number and Software Maintenance Agreement expiry

3.10. Locate Volocity dongle serial number and Software Maintenance Agreement expiry

The Volocity dongle/serial number is an 8 digit number programmed on the Volocity/ILS dongle. Each dongle is also programmed with a  Software Maintenance Agreement (SMA) expiry date.

The Volocity dongle number is printed on the tag which is physically attached to the dongle. If you have a stand alone dongle, it will be plugged into the workstation that Volocity is installed and used on. If you have a License Server dongle (often referred to as an ILS dongle) it will typically be plugged into a server on your local network.

If you need to verify the dongle/serial number or want to check the validity of you SMA:

  1. Start Volocity
  2. Go to the Window menu > Show session log
Here you will see both the SMA expiry date and the Serial number (see Fig 1.)
Fig 1.


This page was: Helpful | Not Helpful
← Why can't I change the filter turret position with my Leica microscope using Volocity? When I make XY points the focus is not stored, each point has the same Z position even though I adjusted the focus when creating the points? →